Be very careful! These codes allow you access to hidden settings on your phone, but you can end up breaking (bricking) the phone. Anyway, here are the codes: Admin Settings: *#6984125*# Admin Settings – Internals (submenu): *#9072641*# Developer Settings: *#0523# Camera test mode:This is useful if you want to speed up the camera shot time, by switching off Auto focus. I found switching it off didn’t make much difference to my photos, but meant the photos were taken a lot faster i.e. no lag. Press *#36287# key string in the dial screen to enter camera test mode menu: [1] Auto focus [On] [2] ISP firmware write [3] ISP firmware version check

* Press the “1″ key to disable auto focus. In order to enable auto focus, press the “1″ key again.
* Press the “2″ key to write the ISP (Camera Module) firmware. “ISP firmware write [Please wait]” will be displayed during 2 minutes. Then “ISP firmware write [SUCCESS]” will be displayed when the firmware upload finished.
* Press the “3″ key to display ISP firmware version.

Test Menu: This is useful to test your phone’s colours, melodies, vibration, touchscreen etc. If you’re having intermittent faults, this tool is useful to identify the exact problem – which could save you some money when repairing the phone. *#0*# Test menu <– Colours, Melody, Vibration, Dimming etc. Some other codes: *#06# IMEI *#1234# Software version *#1111# FTA S/w version *#2222# Hardware info *#0206*8376263# F/W and H/W version *#0228# battery info *2767*3855# Master Reset *#4777*8665# GPRS info *#232337# Bluetooth ID

I Need to increase the phone volume, speaker & mic & earing volume as it’s very low.

Cheers for the codes but after three days of having this phone the vibration has not worked – if anybody can help me with this as the phone shop has said – search the internet. If anybody has or knows of where I can go, please send me an email dholleyuk@hotmail.com cheers in advanced

Hi David,

I’d suggest factory resetting the phone, to restore the default settings to see if it’s a software issue. If that doesn’t work, you can always upgrade to the latest firmware (I’ll be writing a blog post on how to do this soon), although I doubt that would fix any vibration issue.

Failing the above, I can only assume it’s a hardware fault and would need a replacement motor.

Tim.

Hiya,

Nice work with the codes!

I tried the master reset – pressed ‘dial’ and then entered *2767*3855# – ‘cos my phone had passwords on that I didn’t know, but when I put the code in the phone displayed “Admin setting” and asked for a password (numeric only): am I doing this wrong? How do I enter the master reset code? If I knew the passwords I wouldn’t need to reset it! Cheers in advance.

I need to reset my master reset ive entered all the pins ive been told but none of them seem to work anyone know the exact pin for master reset for tocco f480 thanksx

thank the reset code really helped. my phone wouldnt let me acsess the camera. so i reset it and it works fine thanks